Пакет: xc3sprog (0+svn795+dfsg-4)
Връзки за xc3sprog
Ресурси за Debian:
- Доклади за грешки
- Developer Information
- Журнал на промените в Debian
- Авторски права
- Управление на кръпките в Debian
Изтегляне на пакет-източник xc3sprog.
- [xc3sprog_0+svn795+dfsg-4.dsc]
- [xc3sprog_0+svn795+dfsg.orig.tar.gz]
- [xc3sprog_0+svn795+dfsg-4.debian.tar.xz]
Отговорник:
Външни препратки:
- Начална страница [xc3sprog.sourceforge.net]
Подобни пакети:
JTAG flashing tool for FPGAs, CPLDs and EEPROMs
xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs with the Xilinx Parallel Cable and other JTAG adapters under Linux. xc3sprog runs as a command-line application.
The main features include:
- Reading a .BIT file from Xilinx design tools and programming it into an FPGA. - Reading a JEDEC file and programming it into a CPLD. - Programming a .BIT file into an on-board configuration PROM. - Programming a binary image into on-board SPI flash memory. - Reading the contents of a PROM chip back to a file. - Programming AVR microcontrollers.
The functionality of xc3sprog is similar to that of Xilinx IMPACT. There are also similarities with other free JTAG tools, such as UrJTAG. However, xc3sprog has a number of advantages:
- xc3sprog is free software. - It is a command-line tool. - It works on Linux without the need to install binary "cable-drivers". (Although some types of JTAG cables need to load firmware.) - It uses an optional configuration file to recognize new JTAG devices. - It contains programming algorithms for the supported devices, enabling the direct use of binary files (.BIT / JEDEC) from design tools (as opposed to intermediate SVF/STAPLE files).
Други пакети, свързани с xc3sprog
|
|
|
|
-
- dep: libc6 (>= 2.14) [amd64]
- GNU C Library: Shared libraries
също и виртуален пакет, предлаган от libc6-udeb
- dep: libc6 (>= 2.17) [arm64, ppc64el]
- dep: libc6 (>= 2.7) [не amd64, arm64, ppc64el]
-
- dep: libftdi1-2 (>= 1.2)
- C Library to control and program the FTDI USB controllers
-
- dep: libgcc-s1 (>= 3.0) [не armel, armhf]
- GCC support library
- dep: libgcc-s1 (>= 3.5) [armel, armhf]
-
- dep: libstdc++6 (>= 5.2)
- GNU Standard C++ Library v3
-
- dep: libusb-0.1-4 (>= 2:0.1.12)
- userspace USB programming library
Изтегляне на xc3sprog
Архитектура | Големина на пакета | Големина след инсталиране | Файлове |
---|---|---|---|
amd64 | 156,4 кБ | 692,0 кБ | [списък на файловете] |
arm64 | 147,7 кБ | 676,0 кБ | [списък на файловете] |
armel | 137,2 кБ | 596,0 кБ | [списък на файловете] |
armhf | 139,7 кБ | 496,0 кБ | [списък на файловете] |
i386 | 163,6 кБ | 724,0 кБ | [списък на файловете] |
mips64el | 152,5 кБ | 815,0 кБ | [списък на файловете] |
mipsel | 151,1 кБ | 728,0 кБ | [списък на файловете] |
ppc64el | 163,2 кБ | 1 076,0 кБ | [списък на файловете] |
s390x | 143,9 кБ | 696,0 кБ | [списък на файловете] |