套件:ponyprog(3.1.3+ds-2)
ponyprog 的相關連結
Debian 的資源:
下載原始碼套件 ponyprog:
- [ponyprog_3.1.3+ds-2.dsc]
- [ponyprog_3.1.3+ds.orig-qhexedit2.tar.gz]
- [ponyprog_3.1.3+ds.orig.tar.gz]
- [ponyprog_3.1.3+ds-2.debian.tar.xz]
維護小組:
外部的資源:
- 主頁 [github.com]
相似套件:
Serial device programmer
PonyProg is a serial device programmer software with a user friendly GUI framework available for Windows and Linux. It's purpose is reading and writing every serial device. With PonyProg and SI-Prog you can program Wafercard for SAT, eeprom within GSM, TV or CAR-RADIO. Furthermore it can be used as a low cost starter kit for PIC and AVR.
PonyProg supports AVR, SPI eeprom, AVR micro, I2C bus 8bit eeprom, PIC 16 micro, PIC 12 micro, AT89S micro and SDE2506 eeprom family chips.
You can open any HEX, e2p, mot, csm, rom, eep, bin files and burn them to uC or PIC. You can even backup the old program on the chip using PonyProg. PonyProg enables the user to write, verify and erase data on the microchip.
Also setting fuse bits and locks using PonyProg is possible. You can save any HEX file to BIN file or eep file, BIN file to HEX file or MOT file and vice versa so you can use PonyProg as converter too. PonyProg offers serial or parallel port programming for uC's. You can even change polarity of control lines without touching the wires using I/O port setup.
Using PonyProg together with generic USB2serial based on FTDI adapters will work. There are plans on upstream to use libusb to add more USB2serial based functionality.
其他與 ponyprog 有關的套件
|
|
|
|
-
- dep: libc6 (>= 2.38)
- GNU C 函式庫:共用函式庫
同時作為一個虛擬套件由這些套件填實: libc6-udeb
-
- dep: libftdi1-2 (>= 1.2)
- C Library to control and program the FTDI USB controllers
-
- dep: libftdipp1-3 (>= 1.5)
- C++ Library to control and program the FTDI USB controllers
-
- dep: libgcc-s1 (>= 3.4) [riscv64]
- GCC 支援函式庫
- dep: libgcc-s1 (>= 3.5) [armel, armhf]
- dep: libgcc-s1 (>= 4.2) [i386]
-
- dep: libqt5core5t64 (>= 5.15.1)
- Qt 5 core module
-
- dep: libqt5gui5t64 (>= 5.11.0~rc1)
- Qt 5 GUI module
- 或者 libqt5gui5-gles (>= 5.11.0~rc1)
- Qt 5 GUI module — OpenGL ES variant
-
- dep: libqt5multimedia5 (>= 5.6.0~beta)
- Qt 5 Multimedia module
-
- dep: libqt5printsupport5t64 (>= 5.2.0)
- Qt 5 print support module
-
- dep: libqt5widgets5t64 (>= 5.0.2)
- Qt 5 widgets module
-
- dep: libstdc++6 (>= 5.2)
- GNU Standard C++ Library v3
-
- dep: libusb-1.0-0 (>= 2:1.0.16)
- userspace USB programming library
下載 ponyprog
硬體架構 | 套件大小 | 安裝後大小 | 檔案 |
---|---|---|---|
amd64 | 705。9 kB | 2,439。0 kB | [檔案列表] |
arm64 | 667。1 kB | 2,427。0 kB | [檔案列表] |
armel | 667。9 kB | 2,379。0 kB | [檔案列表] |
armhf | 674。0 kB | 2,103。0 kB | [檔案列表] |
i386 | 697。6 kB | 2,319。0 kB | [檔案列表] |
mips64el | 623。3 kB | 2,930。0 kB | [檔案列表] |
ppc64el | 681。1 kB | 2,747。0 kB | [檔案列表] |
riscv64 | 714。1 kB | 2,495。0 kB | [檔案列表] |
s390x | 684。8 kB | 2,619。0 kB | [檔案列表] |