[ 原始碼: xc3sprog ]
套件:xc3sprog(0+svn795+dfsg-3)
xc3sprog 的相關連結
Debian 的資源:
下載原始碼套件 xc3sprog:
- [xc3sprog_0+svn795+dfsg-3.dsc]
- [xc3sprog_0+svn795+dfsg.orig.tar.gz]
- [xc3sprog_0+svn795+dfsg-3.debian.tar.xz]
維護者:
外部的資源:
- 主頁 [xc3sprog.sourceforge.net]
相似套件:
JTAG flashing tool for FPGAs, CPLDs and EEPROMs
xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs with the Xilinx Parallel Cable and other JTAG adapters under Linux. xc3sprog runs as a command-line application.
The main features include:
- Reading a .BIT file from Xilinx design tools and programming it into an FPGA. - Reading a JEDEC file and programming it into a CPLD. - Programming a .BIT file into an on-board configuration PROM. - Programming a binary image into on-board SPI flash memory. - Reading the contents of a PROM chip back to a file. - Programming AVR microcontrollers.
The functionality of xc3sprog is similar to that of Xilinx IMPACT. There are also similarities with other free JTAG tools, such as UrJTAG. However, xc3sprog has a number of advantages:
- xc3sprog is free software. - It is a command-line tool. - It works on Linux without the need to install binary "cable-drivers". (Although some types of JTAG cables need to load firmware.) - It uses an optional configuration file to recognize new JTAG devices. - It contains programming algorithms for the supported devices, enabling the direct use of binary files (.BIT / JEDEC) from design tools (as opposed to intermediate SVF/STAPLE files).
其他與 xc3sprog 有關的套件
|
|
|
|
-
- dep: libc6 (>= 2.14) [amd64]
- GNU C 函式庫:共用函式庫
同時作為一個虛擬套件由這些套件填實: libc6-udeb
- dep: libc6 (>= 2.17) [arm64, ppc64el]
- dep: libc6 (>= 2.7) [除 amd64, arm64, ppc64el]
-
- dep: libftdi1-2 (>= 1.2)
- C Library to control and program the FTDI USB controllers
-
- dep: libgcc-s1 (>= 3.0) [除 armel, armhf]
- GCC 支援函式庫
- dep: libgcc-s1 (>= 3.5) [armel, armhf]
-
- dep: libstdc++6 (>= 5.2)
- GNU Standard C++ Library v3
-
- dep: libusb-0.1-4 (>= 2:0.1.12)
- userspace USB programming library
下載 xc3sprog
硬體架構 | 套件大小 | 安裝後大小 | 檔案 |
---|---|---|---|
amd64 | 156。1 kB | 692。0 kB | [檔案列表] |
arm64 | 147。8 kB | 672。0 kB | [檔案列表] |
armel | 137。3 kB | 592。0 kB | [檔案列表] |
armhf | 140。4 kB | 492。0 kB | [檔案列表] |
i386 | 164。1 kB | 728。0 kB | [檔案列表] |
mips64el | 152。7 kB | 815。0 kB | [檔案列表] |
mipsel | 151。4 kB | 736。0 kB | [檔案列表] |
ppc64el | 163。3 kB | 1,076。0 kB | [檔案列表] |
s390x | 143。9 kB | 700。0 kB | [檔案列表] |