套件:linuxcnc-uspace(2.9.0~pre1+git20230208.f1270d6ed7-1)
linuxcnc-uspace 的相關連結
Debian 的資源:
下載原始碼套件 linuxcnc:
- [linuxcnc_2.9.0~pre1+git20230208.f1270d6ed7-1.dsc]
- [linuxcnc_2.9.0~pre1+git20230208.f1270d6ed7.orig.tar.xz]
- [linuxcnc_2.9.0~pre1+git20230208.f1270d6ed7-1.debian.tar.xz]
維護小組:
外部的資源:
- 主頁 [linuxcnc.org]
相似套件:
motion controller for CNC machines and robots
LinuxCNC is a fully-realised CNC machine controller that can interpret machine-control programs (such as G-code), plan trajectories and finally output low-level signals to machine control hardware
LinuxCNC is modular and in principle the HAL (hardware abstraction layer), pluggable interpreters and variety of hardware drivers mean that it can control almost any software-defined physical system.
LinuxCNC relies on a realtime kernel to support real-time motion control, typically updating the position waypoints every 1mS and reacting to input within tens of microseconds.
Modules exist to use the low-level parts of LinuxCNC as a motion-control client for OpenPnP. Interfaces exist for ROS (the Robot Operating System) with which LinuxCNC has considerable overlap.
LinuxCNC supports arbitrary kinematics (the mapping between coordinate space and actuator space) and can control both parallel (eg Stewart platform) and serial (eg robot arm) systems in addition to conventional cartesian machine tools.
LinuxCNC supports 9 cartesian axes and 16 "Joints" (individual actuators) though the joint limit is build-time configurable.
A variety of interface hardware is supported including Modbus, EtherCAT, analogue +/-10V velocity control and Step/Dir. Step/Dir is supported by several hardware interfaces, including, but not limited to, the legacy Parallel Port.
A Hardware Abstraction Layer allows for great flexibility in signal mapping between the controller and the driver hardware. An extensive library of modules allow for complex signal processing within the HAL layer. For specialised tasks custom HAL components can be created using a C-like syntax and installed with the supplied tools.
By default LinuxCNC supports RS274 G-code but is extendable to parse other grammars such as STEP-NC or Gerber through support for pluggable interpreters.
If you want a computer to control things in the real world then LinuxCNC can do it. It is especially applicable to systems that are required to follow accurate paths described in cartesian space but has been used for numerous other applications.
This package provides the main package for LinuxCNC.
其他與 linuxcnc-uspace 有關的套件
|
|
|
|
-
- dep: blt
- graphics extension library for Tcl/Tk - run-time
-
- dep: bwidget (>= 1.7)
- Extension widgets for Tcl/Tk
-
- dep: iptables
- administration tools for packet filtering and NAT
-
- dep: libboost-python1.74.0 (>= 1.74.0+ds1)
- Boost.Python Library
-
- dep: libboost-python1.74.0-py311
- 本虛擬套件由這些套件填實: libboost-python1.74.0
-
- dep: libc6 (>= 2.35)
- GNU C 函式庫:共用函式庫
同時作為一個虛擬套件由這些套件填實: libc6-udeb
-
- dep: libcairo2 (>= 1.2.4)
- Cairo 2D vector graphics library
-
- dep: libedit2 (>= 2.11-20080614-0)
- BSD editline and history libraries
-
- dep: libepoxy0 (>= 1.0)
- OpenGL function pointer management library
-
- dep: libgcc-s1 (>= 4.0)
- GCC 支援函式庫
-
- dep: libglib2.0-0 (>= 2.12.0)
- GLib library of C routines
-
- dep: libgtk-3-0 (>= 3.11.5)
- GTK graphical user interface library
-
- dep: libgtk2.0-0 (>= 2.8.0)
- GTK graphical user interface library - old version
-
- dep: libgtksourceview-3.0-dev
- development files for the GTK+ syntax highlighting widget
-
- dep: libmodbus5 (>= 3.1.4)
- library for the Modbus protocol
-
- dep: libpango-1.0-0 (>= 1.14.0)
- Layout and rendering of internationalized text
-
- dep: libpangocairo-1.0-0 (>= 1.14.0)
- Layout and rendering of internationalized text
-
- dep: libpython3.11 (>= 3.11.0)
- Shared Python runtime library (version 3.11)
-
- dep: libstdc++6 (>= 11)
- GNU Standard C++ Library v3
-
- dep: libtirpc3 (>= 1.0.2)
- transport-independent RPC library
-
- dep: libtk8.6 (>= 8.6.0)
- Tk toolkit for Tcl and X11 v8.6 - run-time files
-
- dep: libudev-dev
- libudev development files
-
- dep: libudev1 (>= 183)
- libudev shared library
-
- dep: libusb-1.0-0 (>= 2:1.0.22)
- userspace USB programming library
-
- dep: libx11-6
- X11 client-side library
-
- dep: libxinerama1 (>= 2:1.1.4)
- X11 Xinerama extension library
-
- dep: libxmu6 (>= 2:1.1.3)
- X11 miscellaneous utility library
-
- dep: mesa-utils
- Miscellaneous Mesa utilities -- symlinks
-
- dep: procps
- /proc file system utilities
-
- dep: psmisc
- utilities that use the proc file system
-
- dep: python3
- interactive high-level object-oriented language (default python3 version)
- dep: python3 (<< 3.12)
- dep: python3 (>= 3.11~)
-
- dep: python3-cairo
- Python3 bindings for the Cairo vector graphics library
-
- dep: python3-configobj
- simple but powerful config file reader and writer for Python 3
-
- dep: python3-gi-cairo
- Python 3 Cairo bindings for the GObject library
-
- dep: python3-numpy
- Fast array facility to the Python 3 language
-
- dep: python3-opengl
- Python bindings to OpenGL (Python 3)
-
- dep: python3-tk
- Tkinter - Writing Tk applications with Python 3.x
-
- dep: python3-xlib
- interface for Python 3 to the X11 protocol
-
- dep: tcl8.6
- Tcl (the Tool Command Language) v8.6 - shell
-
- dep: tclreadline
- 本虛擬套件由這些套件填實: tcl-tclreadline
-
- dep: tk8.6
- Tk toolkit for Tcl and X11 v8.6 - windowing shell
-
- dep: udev
- /dev/ 及 熱插拔管理伺服程式
-
- rec: espeak
- Multi-lingual software speech synthesizer
同時作為一個虛擬套件由這些套件填實: espeak-ng-espeak
-
- rec: espeak-ng
- Multi-lingual software speech synthesizer
-
- rec: gstreamer1.0-tools
- Tools for use with GStreamer
-
- rec: hostmot2-firmware-all
- 套件暫時不可用
-
- rec: librsvg2-dev
- SAX-based renderer library for SVG files (development)
-
- rec: linuxcnc-doc-en
- motion controller for CNC machines and robots (English documentation)
- 或者 linuxcnc-doc
- 本虛擬套件由這些套件填實: linuxcnc-doc-de, linuxcnc-doc-en, linuxcnc-doc-es, linuxcnc-doc-fr, linuxcnc-doc-zh-cn
-
- rec: pyqt5-dev-tools
- Development tools for PyQt5
-
- rec: python3-dbus
- simple interprocess messaging system (Python 3 interface)
-
- rec: python3-dbus.mainloop.pyqt5
- D-Bus Qt main loop support for Python 3
-
- rec: python3-espeak
- Python bindings for eSpeak
-
- rec: python3-opencv
- Python 3 bindings for the computer vision library
-
- rec: python3-pil
- Python Imaging Library (Python3)
-
- rec: python3-pil.imagetk
- Python Imaging Library - ImageTk Module (Python3)
-
- rec: python3-poppler-qt5
- Python binding to Poppler-Qt5 C++ library (Python 3)
-
- rec: python3-pyqt5
- Python 3 bindings for Qt5
-
- rec: python3-pyqt5.qsci
- Python 3 bindings for QScintilla 2 with Qt 5
-
- rec: python3-pyqt5.qtopengl
- Python 3 bindings for Qt5's OpenGL module
-
- rec: python3-pyqt5.qtsvg
- Python 3 bindings for Qt5's SVG module
-
- rec: python3-pyqt5.qtwebkit
- Python 3 bindings for Qt5's WebKit module
-
- rec: sound-theme-freedesktop
- freedesktop.org sound theme