软件包:libflashrom1(1.4.0-3)
Identify, read, write, erase, and verify BIOS/ROM/flash chips - library
flashrom is a tool for identifying, reading, writing, verifying and erasing flash chips. It's often used to flash BIOS/EFI/coreboot/firmware/optionROM images in-system using a supported mainboard, but it also supports flashing of network cards (NICs), SATA controller cards, and other external devices which can program flash chips.
It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32/40/48, and BGA chips, which use various protocols such as LPC, FWH, parallel flash, or SPI.
The tool can be used to flash BIOS/firmware images for example -- be it proprietary BIOS images or coreboot (previously known as LinuxBIOS) images.
It can also be used to read the current existing BIOS/firmware from a flash chip.
This package provides flashrom library development files.
其他与 libflashrom1 有关的软件包
|
|
|
|
-
- dep: libc6 (>= 2.33) [除 armel, armhf]
- GNU C 语言运行库:共享库
同时作为一个虚包由这些包填实: libc6-udeb
- dep: libc6 (>= 2.34) [armel, armhf]
-
- dep: libftdi1-2 (>= 1.2)
- C Library to control and program the FTDI USB controllers
-
- dep: libjaylink0 (>= 0.3.1)
- library for interacting with J-Link programmers
-
- dep: libpci3 (>= 1:3.13.0)
- PCI 组件(共享库)
-
- dep: libusb-1.0-0 (>= 2:1.0.22)
- userspace USB programming library
下载 libflashrom1
硬件架构 | 软件包大小 | 安装后大小 | 文件 |
---|---|---|---|
amd64 | 206.7 kB | 1,034.0 kB | [文件列表] |
arm64 | 141.8 kB | 858.0 kB | [文件列表] |
armel | 128.1 kB | 725.0 kB | [文件列表] |
armhf | 128.6 kB | 657.0 kB | [文件列表] |
i386 | 213.0 kB | 1,001.0 kB | [文件列表] |
mips64el | 136.5 kB | 883.0 kB | [文件列表] |
ppc64el | 162.7 kB | 922.0 kB | [文件列表] |
riscv64 | 150.3 kB | 758.0 kB | [文件列表] |
s390x | 144.8 kB | 810.0 kB | [文件列表] |