软件包：gvpe（3.1-2 以及其他的）
creates a virtual ethernet between multiple endpoints
GVPE creates a virtual ethernet (broadcasts supported, any protocol that works with a normal ethernet should work with GVPE) by creating encrypted host-to-host tunnels between multiple endpoints.
Unlike other virtual private "network" solutions which merely create a single tunnel, GVPE creates a real network with multiple endpoints.
It is designed to be very simple and robust (cipher selection done at compiletime etc.), and easy to setup (only a single config file shared unmodified between all hosts).
VPN hosts can neither sniff nor fake packets, that is, you can use MAC-based filtering to ensure authenticity of packets even from member nodes.
GVPE can also be used to tunnel into some vpn network using a variety of protocols (raw IP, UDP, TCP, HTTPS-proxy-connect, ICMP and DNS). It is, however, primarily designed to sit on the gateway machines of company branches to connect them together.
其他与 gvpe 有关的软件包
|
|
|
|
-
- dep: init-system-helpers (>= 1.51)
- 所有初始化系统的帮助工具
-
- dep: libc6 (>= 2.34) [除 alpha, arm64, ia64, sh4]
- GNU C 语言运行库：共享库
同时作为一个虚包由这些包填实： libc6-udeb
- dep: libc6 (>= 2.37) [sh4]
- dep: libc6 (>= 2.38) [arm64]
-
- dep: libc6.1 (>= 2.34) [alpha]
- GNU C 语言运行库：共享库
同时作为一个虚包由这些包填实： libc6.1-udeb
- dep: libc6.1 (>= 2.37) [ia64]
-
- dep: libgcc-s1 (>= 3.0) [除 armel, armhf, hppa, ia64, m68k, riscv64]
- GCC 支持库
- dep: libgcc-s1 (>= 3.5) [armel, armhf]
- dep: libgcc-s1 (>= 4.2) [ia64]
- dep: libgcc-s1 (>= 4.3) [riscv64]
-
- dep: libgcc-s2 (>= 4.2.1) [m68k]
- GCC 支持库
-
- dep: libgcc-s4 (>= 4.1.1) [hppa]
- GCC 支持库
-
- dep: libssl3t64 (>= 3.0.0)
- 安全套接字层工具箱 - 共享库
-
- dep: libstdc++6 (>= 11)
- GNU 标准 C++ 库，第3版
-
- dep: libunwind8 [ia64]
- library to determine the call-chain of a program - runtime
-
- dep: lsb-base
- Linux 标准规范初始化脚本功能的过渡软件包
下载 gvpe
| 硬件架构 | 版本 | 软件包大小 | 安装后大小 | 文件 |
|---|---|---|---|---|
| alpha （非官方移植版） | 3.1-2+b2 | 160.5 kB | 452.0 kB | [文件列表] |
| amd64 | 3.1-2+b3 | 155.5 kB | 340.0 kB | [文件列表] |
| arm64 | 3.1-2+b3 | 153.7 kB | 388.0 kB | [文件列表] |
| armel | 3.1-2+b2 | 140.9 kB | 310.0 kB | [文件列表] |
| armhf | 3.1-2+b2 | 140.7 kB | 262.0 kB | [文件列表] |
| hppa （非官方移植版） | 3.1-2+b2 | 154.0 kB | 339.0 kB | [文件列表] |
| i386 | 3.1-2+b2 | 155.5 kB | 337.0 kB | [文件列表] |
| ia64 （非官方移植版） | 3.1-2+b2 | 181.6 kB | 548.0 kB | [文件列表] |
| m68k （非官方移植版） | 3.1-2+b2 | 144.7 kB | 313.0 kB | [文件列表] |
| mips64el | 3.1-2+b2 | 170.4 kB | 530.0 kB | [文件列表] |
| ppc64 （非官方移植版） | 3.1-2+b2 | 162.2 kB | 521.0 kB | [文件列表] |
| ppc64el | 3.1-2+b2 | 163.6 kB | 452.0 kB | [文件列表] |
| riscv64 | 3.1-2+b2 | 163.4 kB | 316.0 kB | [文件列表] |
| s390x | 3.1-2+b2 | 156.3 kB | 364.0 kB | [文件列表] |
| sh4 （非官方移植版） | 3.1-2+b2 | 155.0 kB | 385.0 kB | [文件列表] |
| sparc64 （非官方移植版） | 3.1-2+b2 | 154.2 kB | 2,188.0 kB | [文件列表] |
| x32 （非官方移植版） | 3.1-2+b2 | 151.7 kB | 322.0 kB | [文件列表] |