Pakiet: xc3sprog (0+svn795+dfsg-4 i inne)
Odnośniki dla xc3sprog
Zasoby systemu Debian:
- Raporty o błędach
- Developer Information
- Dziennik zmian w systemie Debian
- Informacje nt. praw autorskich
- Śledzenie łatek systemu Debian
Pobieranie pakietu źródłowego xc3sprog:
- [xc3sprog_0+svn795+dfsg-4.dsc]
- [xc3sprog_0+svn795+dfsg.orig.tar.gz]
- [xc3sprog_0+svn795+dfsg-4.debian.tar.xz]
Opiekun:
Zasoby zewnętrzne:
- Strona internetowa [xc3sprog.sourceforge.net]
Podobne pakiety:
JTAG flashing tool for FPGAs, CPLDs and EEPROMs
xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs with the Xilinx Parallel Cable and other JTAG adapters under Linux. xc3sprog runs as a command-line application.
The main features include:
- Reading a .BIT file from Xilinx design tools and programming it into an FPGA. - Reading a JEDEC file and programming it into a CPLD. - Programming a .BIT file into an on-board configuration PROM. - Programming a binary image into on-board SPI flash memory. - Reading the contents of a PROM chip back to a file. - Programming AVR microcontrollers.
The functionality of xc3sprog is similar to that of Xilinx IMPACT. There are also similarities with other free JTAG tools, such as UrJTAG. However, xc3sprog has a number of advantages:
- xc3sprog is free software. - It is a command-line tool. - It works on Linux without the need to install binary "cable-drivers". (Although some types of JTAG cables need to load firmware.) - It uses an optional configuration file to recognize new JTAG devices. - It contains programming algorithms for the supported devices, enabling the direct use of binary files (.BIT / JEDEC) from design tools (as opposed to intermediate SVF/STAPLE files).
Inne pakiety związane z xc3sprog
|
|
|
|
-
- dep: libc6 (>= 2.11) [hppa]
- Biblioteka GNU C: biblioteki współdzielone
również pakiet wirtualny udostępniany przez libc6-udeb
- dep: libc6 (>= 2.14) [amd64]
- dep: libc6 (>= 2.16) [x32]
- dep: libc6 (>= 2.17) [arm64, ppc64el]
- dep: libc6 (>= 2.31) [sh4]
- dep: libc6 (>= 2.34) [riscv64]
- dep: libc6 (>= 2.7) [armel, armhf, i386, m68k, mips64el, ppc64, s390x, sparc64]
-
- dep: libc6.1 (>= 2.31) [ia64]
- Biblioteka GNU C: biblioteki współdzielone
również pakiet wirtualny udostępniany przez libc6.1-udeb
- dep: libc6.1 (>= 2.34) [alpha]
-
- dep: libftdi1-2 (>= 1.2)
- C Library to control and program the FTDI USB controllers
-
- dep: libgcc-s1 (>= 3.0) [nie armel, armhf, hppa, ia64, m68k]
- Biblioteka wspomagająca GCC
- dep: libgcc-s1 (>= 3.5) [armel, armhf]
- dep: libgcc-s1 (>= 4.2) [ia64]
-
- dep: libgcc-s2 (>= 4.2.1) [m68k]
- Biblioteka wspomagająca GCC
-
- dep: libgcc-s4 (>= 4.1.1) [hppa]
- Biblioteka wspomagająca GCC
-
- dep: libstdc++6 (>= 5.2)
- Standardowa biblioteka GNU C++, wersja 3
-
- dep: libunwind8 [ia64]
- Biblioteka do ustalania łańcucha wywołań programu - środowisko uruchomieniowe
-
- dep: libusb-0.1-4 (>= 2:0.1.12)
- Biblioteka programowania USB w przestrzeni użytkownika
-
- dep: libusb-1.0-0 (>= 2:1.0.8) [hppa, m68k, sh4, sparc64]
- Biblioteka programowania USB w przestrzeni użytkownika
Pobieranie xc3sprog
Architektura | Wersja | Rozmiar pakietu | Rozmiar po instalacji | Pliki |
---|---|---|---|---|
alpha (port nieoficjalny) | 0+svn795+dfsg-4 | 155,8 KiB | 1 080,0 KiB | [lista plików] |
amd64 | 0+svn795+dfsg-4 | 156,4 KiB | 692,0 KiB | [lista plików] |
arm64 | 0+svn795+dfsg-4 | 147,7 KiB | 676,0 KiB | [lista plików] |
armel | 0+svn795+dfsg-4 | 137,2 KiB | 596,0 KiB | [lista plików] |
armhf | 0+svn795+dfsg-4 | 139,7 KiB | 496,0 KiB | [lista plików] |
hppa (port nieoficjalny) | 0+svn795+dfsg-4 | 157,6 KiB | 671,0 KiB | [lista plików] |
i386 | 0+svn795+dfsg-4 | 163,6 KiB | 724,0 KiB | [lista plików] |
ia64 (port nieoficjalny) | 0+svn795+dfsg-4 | 180,1 KiB | 1 083,0 KiB | [lista plików] |
m68k (port nieoficjalny) | 0+svn795+dfsg-4 | 154,4 KiB | 787,0 KiB | [lista plików] |
mips64el | 0+svn795+dfsg-4 | 152,5 KiB | 815,0 KiB | [lista plików] |
ppc64 (port nieoficjalny) | 0+svn795+dfsg-4 | 160,9 KiB | 1 076,0 KiB | [lista plików] |
ppc64el | 0+svn795+dfsg-4 | 163,2 KiB | 1 076,0 KiB | [lista plików] |
riscv64 | 0+svn795+dfsg-4+b1 | 158,5 KiB | 613,0 KiB | [lista plików] |
s390x | 0+svn795+dfsg-4 | 143,9 KiB | 696,0 KiB | [lista plików] |
sh4 (port nieoficjalny) | 0+svn795+dfsg-4 | 159,9 KiB | 664,0 KiB | [lista plików] |
sparc64 (port nieoficjalny) | 0+svn795+dfsg-4 | 138,4 KiB | 718,0 KiB | [lista plików] |
x32 (port nieoficjalny) | 0+svn795+dfsg-4 | 164,2 KiB | 684,0 KiB | [lista plików] |