パッケージ: mender-client (3.4.0+ds1-5 など)
mender-client に関するリンク
Debian の資源:
mender-client ソースパッケージをダウンロード:
- [mender-client_3.4.0+ds1-5.dsc]
- [mender-client_3.4.0+ds1.orig.tar.xz]
- [mender-client_3.4.0+ds1-5.debian.tar.xz]
メンテナ:
外部の資源:
- ホームページ [github.com]
類似のパッケージ:
Mender over-the-air software updater client.
Mender: over-the-air updater for embedded Linux devices
Mender is an open source over-the-air (OTA) software updater for embedded Linux devices. Mender comprises a client running at the embedded device, as well as a server that manages deployments across many devices.
Embedded product teams often end up creating homegrown updaters at the last minute due to the need to fix bugs in field-deployed devices. However, the most important requirement for an embedded update process is robustness, for example loss of power at any time should not brick a device. This creates a challenge given the time constraints to develop and maintain a homegrown updater.
Mender aims to address this challenge with a robust and easy to use updater for embedded Linux devices, which is open source and available to anyone.
Robustness is ensured with atomic image-based deployments using a dual A/B rootfs partition layout. This makes it always possible to roll back to a working state, even when losing power at any time during the update process.
Ease of use is addressed with an intuitive UI, comprehensive documentation (https://docs.mender.io/), a meta layer for the Yocto Project (https://github.com/mendersoftware/meta-mender) for easy integration into existing environments, and high quality software (see the test coverage badge).
This repository contains the Mender client updater, which can be run in standalone mode (manually triggered through its command line interface) or managed mode (connected to the Mender server).
Mender not only provides the client-side updater, but also the backend and UI for managing deployments as open source. The Mender server is designed as a microservices architecture and comprises several repositories.
To start using Mender, we recommend that you begin with the Getting started section in the Mender documentation (https://docs.mender.io/).
In order to support rollback, the Mender client depends on integration with U-Boot and the partition layout. It is therefore most easily built as part of your Yocto Project image by using the meta layer for the Yocto Project (https://github.com/mendersoftware/meta-mender).
その他の mender-client 関連パッケージ
|
|
|
|
-
- dep: libc6 (>= 2.38)
- GNU C ライブラリ: 共有ライブラリ
以下のパッケージによって提供される仮想パッケージでもあります: libc6-udeb
-
- dep: libglib2.0-0t64 (>= 2.26.0)
- C ルーチンの GLib ライブラリ
-
- dep: liblzma5 (>= 5.1.1alpha+20120614)
- XZ 形式の圧縮ライブラリ
-
- dep: libssl3t64 (>= 3.0.0)
- Secure Sockets Layer ツールキット - 共有ライブラリ
-
- rec: ca-certificates
- 一般的な CA の証明書
-
- rec: default-dbus-system-bus
- 以下のパッケージによって提供される仮想パッケージです: dbus
- または dbus-system-bus
- 以下のパッケージによって提供される仮想パッケージです: dbus-broker
-
- rec: libubootenv-tool (>= 0.3-3~)
- Library to access U-Boot environment - tool
- または u-boot-tools (<< 2019.10~rc4+dfsg-1~)
- companion tools for Das U-Boot bootloader
-
- rec: mount
- ファイルシステムのマウントおよび操作用ツール
-
- rec: procps
- /proc ファイルシステムユーティリティ
-
- rec: systemd-sysv
- システムおよびサービスマネージャ - SysV 互換シンボリックリンク
mender-client のダウンロード
アーキテクチャ | バージョン | パッケージサイズ | インストールサイズ | ファイル |
---|---|---|---|---|
amd64 | 3.4.0+ds1-5+b9 | 3,456.5 kB | 11,070.0 kB | [ファイル一覧] |
arm64 | 3.4.0+ds1-5+b9 | 2,966.2 kB | 10,566.0 kB | [ファイル一覧] |
armel | 3.4.0+ds1-5+b9 | 2,922.4 kB | 10,419.0 kB | [ファイル一覧] |
armhf | 3.4.0+ds1-5+b9 | 2,913.9 kB | 10,363.0 kB | [ファイル一覧] |
i386 | 3.4.0+ds1-5+b9 | 3,184.3 kB | 10,541.0 kB | [ファイル一覧] |
mips64el | 3.4.0+ds1-5+b9 | 2,658.7 kB | 12,013.0 kB | [ファイル一覧] |
ppc64el | 3.4.0+ds1-5+b9 | 2,943.3 kB | 10,885.0 kB | [ファイル一覧] |
riscv64 | 3.4.0+ds1-5+b8 | 2,972.2 kB | 10,390.0 kB | [ファイル一覧] |
s390x | 3.4.0+ds1-5+b9 | 3,125.4 kB | 11,638.0 kB | [ファイル一覧] |