Paquet : libflashrom1 (1.3.0-2.1 et autres)
Liens pour libflashrom1
Ressources Debian :
- Rapports de bogues
- Developer Information
- Journal des modifications Debian
- Fichier de licence
- Suivis des correctifs pour Debian
Télécharger le paquet source flashrom :
Responsables :
- Debian EFI (Page QA, Archive du courrier électronique)
- Jeremiah C. Foster (Page QA)
- Mario Limonciello (Page QA)
- Gürkan Myczko (Page QA)
Ressources externes :
- Page d'accueil [www.flashrom.org]
Paquets similaires :
Identify, read, write, erase, and verify BIOS/ROM/flash chips - library
flashrom is a tool for identifying, reading, writing, verifying and erasing flash chips. It's often used to flash BIOS/EFI/coreboot/firmware/optionROM images in-system using a supported mainboard, but it also supports flashing of network cards (NICs), SATA controller cards, and other external devices which can program flash chips.
It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32/40/48, and BGA chips, which use various protocols such as LPC, FWH, parallel flash, or SPI.
The tool can be used to flash BIOS/firmware images for example -- be it proprietary BIOS images or coreboot (previously known as LinuxBIOS) images.
It can also be used to read the current existing BIOS/firmware from a flash chip.
This package provides flashrom library development files.
Autres paquets associés à libflashrom1
|
|
|
|
-
- dep: libc6 (>= 2.28) [x32]
- bibliothèque C GNU : bibliothèques partagées
un paquet virtuel est également fourni par libc6-udeb
- dep: libc6 (>= 2.33) [non alpha, ia64, sh4, x32]
- dep: libc6 (>= 2.36) [sh4]
-
- dep: libc6.1 (>= 2.33) [alpha]
- bibliothèque C GNU : bibliothèques partagées
un paquet virtuel est également fourni par libc6.1-udeb
- dep: libc6.1 (>= 2.36) [ia64]
-
- dep: libftdi1-2 (>= 1.2)
- C Library to control and program the FTDI USB controllers
-
- dep: libjaylink0 (>= 0.3.1) [non x32]
- library for interacting with J-Link programmers
-
- dep: libpci3 (>= 1:3.5.1) [x32]
- utilitaires PCI – bibliothèque partagée
- dep: libpci3 (>= 1:3.8.0) [non x32]
-
- dep: libusb-1.0-0 (>= 2:1.0.22)
- bibliothèque de programmation de l'USB en espace utilisateur
Télécharger libflashrom1
Architecture | Version | Taille du paquet | Espace occupé une fois installé | Fichiers |
---|---|---|---|---|
alpha (portage non officiel) | 1.3.0-2.1 | 149,3 ko | 924,0 ko | [liste des fichiers] |
amd64 | 1.3.0-2.1+b1 | 201,3 ko | 1 059,0 ko | [liste des fichiers] |
arm64 | 1.3.0-2.1+b1 | 137,3 ko | 859,0 ko | [liste des fichiers] |
armel | 1.3.0-2.1+b1 | 122,8 ko | 698,0 ko | [liste des fichiers] |
armhf | 1.3.0-2.1+b1 | 124,3 ko | 630,0 ko | [liste des fichiers] |
hppa (portage non officiel) | 1.3.0-2.1 | 139,3 ko | 787,0 ko | [liste des fichiers] |
i386 | 1.3.0-2.1+b1 | 205,5 ko | 958,0 ko | [liste des fichiers] |
ia64 (portage non officiel) | 1.3.0-2.1 | 172,7 ko | 1 125,0 ko | [liste des fichiers] |
m68k (portage non officiel) | 1.3.0-2.1 | 134,7 ko | 713,0 ko | [liste des fichiers] |
mips64el | 1.3.0-2.1+b1 | 130,5 ko | 883,0 ko | [liste des fichiers] |
ppc64 (portage non officiel) | 1.3.0-2.1 | 154,3 ko | 986,0 ko | [liste des fichiers] |
ppc64el | 1.3.0-2.1+b1 | 157,9 ko | 987,0 ko | [liste des fichiers] |
riscv64 | 1.3.0-2.1+b1 | 146,4 ko | 791,0 ko | [liste des fichiers] |
s390x | 1.3.0-2.1+b1 | 139,9 ko | 839,0 ko | [liste des fichiers] |
sh4 (portage non officiel) | 1.3.0-2.1 | 150,4 ko | 730,0 ko | [liste des fichiers] |
sparc64 (portage non officiel) | 1.3.0-2.1 | 119,4 ko | 1 055,0 ko | [liste des fichiers] |
x32 (portage non officiel) | 1.2-5 | 115,3 ko | 560,0 ko | [liste des fichiers] |