Package: xc3sprog (0+svn795+dfsg-1)
Links for xc3sprog
Debian Resources:
Download Source Package xc3sprog:
- [xc3sprog_0+svn795+dfsg-1.dsc]
- [xc3sprog_0+svn795+dfsg.orig.tar.gz]
- [xc3sprog_0+svn795+dfsg-1.debian.tar.xz]
Maintainer:
External Resources:
- Homepage [xc3sprog.sourceforge.net]
Similar packages:
JTAG flashing tool for FPGAs, CPLDs and EEPROMs
xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs with the Xilinx Parallel Cable and other JTAG adapters under Linux. xc3sprog runs as a command-line application.
The main features include:
- Reading a .BIT file from Xilinx design tools and programming it into an FPGA. - Reading a JEDEC file and programming it into a CPLD. - Programming a .BIT file into an on-board configuration PROM. - Programming a binary image into on-board SPI flash memory. - Reading the contents of a PROM chip back to a file. - Programming AVR microcontrollers.
The functionality of xc3sprog is similar to that of Xilinx IMPACT. There are also similarities with other free JTAG tools, such as UrJTAG. However, xc3sprog has a number of advantages:
- xc3sprog is free software. - It is a command-line tool. - It works on Linux without the need to install binary "cable-drivers". (Although some types of JTAG cables need to load firmware.) - It uses an optional configuration file to recognize new JTAG devices. - It contains programming algorithms for the supported devices, enabling the direct use of binary files (.BIT / JEDEC) from design tools (as opposed to intermediate SVF/STAPLE files).
Other Packages Related to xc3sprog
|
|
|
|
-
- dep: libc6 (>= 2.1.3) [i386]
- GNU C Library: Shared libraries
also a virtual package provided by libc6-udeb
- dep: libc6 (>= 2.14) [amd64]
- dep: libc6 (>= 2.17) [arm64]
- dep: libc6 (>= 2.4) [armhf]
-
- dep: libftdi1-2 (>= 1.2)
- Library to control and program the FTDI USB controllers
-
- dep: libgcc1 (>= 1:3.0) [not armhf]
- GCC support library
- dep: libgcc1 (>= 1:3.5) [armhf]
-
- dep: libstdc++6 (>= 5.2)
- GNU Standard C++ Library v3
-
- dep: libusb-0.1-4 (>= 2:0.1.12)
- userspace USB programming library
-
- dep: libusb-1.0-0 (>= 2:1.0.8)
- userspace USB programming library
Download xc3sprog
Architecture | Package Size | Installed Size | Files |
---|---|---|---|
amd64 | 170.3 kB | 1,009.0 kB | [list of files] |
arm64 | 157.1 kB | 1,009.0 kB | [list of files] |
armhf | 148.5 kB | 773.0 kB | [list of files] |
i386 | 173.4 kB | 941.0 kB | [list of files] |